Art Glass Glossary and Terms

Antique

1. Full Antique: Term applied to art glass produced by the historical mouth-blown cylinder method. The craftsman blows a glass cylinder which is annealed and cooled. The cylinder is then scored lengthwise, separated, re-heated and folded out into a flat sheet. Common characteristics include attractive linear striations and a very pristine surface.
2. Drawn Antique: Also called semi-antique, machine antique or new antique. A simulated full-antique produced by the Vertical Draw method (see Sheet Forming Methods). The textural striations are mechanically applied. Quality is excellent and cost is less than full antique. GNA (German New Antique) is a common example.
3. Scribed Antique: A simulated full antique produced by the Double Roll method (see Sheet Forming Methods). The linear striations are scribed into the hot glass surface. Quality is excellent and cost is considerably less than full antique. Introduced by Spectrum® Glass in 1996 under the trade name Artíque®.

 

Artíque®

See Scribed Antique above.

 

Baroque™

A machine-made "reamy" glass created by combining glasses of mismatched compositions. The different glasses "oppose" each other when they are stirred together, creating artistic 3-D swirls. This glass is exclusive to Spectrum.

 

Bent (or Slumped) Glass

Glass that has been heated in a kiln, from room temperature, to a temperature high enough to cause it to soften and slump (sag) into/over a mold. The finished item takes the shape of the mold.

 

Bevel

Cold glass; usually clear thick plate, with edges that have been ground and polished to an angle, other than 90 degrees. Transmitted light is refracted and a prism-like effect results. Bevels are available in a variety of sizes, shapes and geometric configurations (called "clusters") for incorporation into leaded glass work.

 

Billet

A glass ingot; similar to a dale used in glass casting.

 

C.O.E.

See Coefficient of Expansion.

 

Came

Channelled strips of lead, zinc or other metal used to bind glass pieces within a design. (See ‘Leaded Glass’)

 

Cane

A glass cylinder consisting of variously coloured rods bundled together. These are then fused to form a design that is visible in cross section.

 

Cast Glass

A glass art medium whereby glass is melted inside a pre-shaped mould, or melted and then poured into a pre-shaped mould, to create a finished project.

 

Cathedral Glass

Transparent glass that is monochromatic - I.e. single colour sheet glass, with smooth or textured surfaces.

 

Catspaw

(Single Roll forming method) A surface texture resulting from the chilling of hot glass on a cool table - the appearance is likened to the paw prints of a cat.

 

Coefficient of Expansion

The ratio of the change in length or volume of a glass, to its original length or volume, per unit change in temperature. Used to help determine compatibility of different glasses for the fusing process. (See Compatible and Tested Compatible)

 

Confetti

Paper-thin elements of glass that can be incorporated into a fused or blown glass design. Also called "shards".

 

Combing

Process in which a rake-like tool is drawn across molten glass to create artistic patterns.

 

Compatible/Compatibility

Glasses are said to be compatible if, after being fused together by blowing or kiln forming and properly annealed, they remain relatively free from internal stress. (See Coefficient of Expansion)

 

Copper Foil

Thin, narrow strips of adhesive-backed copper tape used to wrap the edges of glass pieces that have been cut to fit a pattern. Once wrapped, solder is applied, bonding the glass pieces together. Assembling a stained glass project in this manner is called the "copper foil technique." Louis Tiffany is credited with its development.

 

Crackle

(Blown Cylinder method) The hot cylinder of glass is dipped in liquid, causing radical, random fissures in the glass. The cylinder is then reheated and further blown to heal the surface fissures. Resulting surface resembles the texture of alligator skin.

 

Dalles

Thick slabs of cathedral glass - usually 1 inch.

 

Dalle de Verre

An art glass medium in which dalles are broken into pieces with a carbon hammer and set in an epoxy base to adhere them in a decorative design. Dependent on large scale for best appearance, they are primarily used in architectural applications such as church walls.

 

Dichroic

Commonly used term to describe glasses that have been coated with one or more ultra-thin crystalline layers of transparent metal oxides designed to enhance reflections at specific wavelengths of light. The process occurs in a vacuum chamber at elevated temperatures. The resulting effects are striking and brilliant colour reflections at varying angles of incidence.

 

Drapery Glass

Glass sheets with multiple dramatic folds, likened to those in hanging drapes.

 

Expansion Coefficient

A numerical designator assigned to a glass to describe its Coefficient of Expansion.

 

Flashed

Glass of one colour with a very thin layer of another colour on one side. Flashed glass is often used for etched or sandblasted glass art. When sections of the thin colour layer are removed, the base colour shows through.

 

Flux

Chemical agent (liquid or paste) used to facilitate the flow of solder and prevent formation of oxides during soldering.

 

Frit

Ground glass ranging in particle size from gravel-like to a fine powder. Frit is sometimes used as a raw material in glass manufacture, and sometimes as a colouring agent or for decorative effect in hot glass crafts like blowing and fusing.

 

Fused Glass

Glass forms produced by placing different pieces of glass in contact with each other in an arranged design; and then firing them in a kiln at a temperature high enough to fuse them into one piece of glass.

 

Fractures & Streamers

In the single roll process (see Sheet Forming Methods), thin glass chips or shards (fractures) and/or glass string (streamers) are arranged on the casting table before the glass is poured, and thus pressed into the glass sheet as it is formed.

 

Glob

See Nugget.

 

Glue-Chip

A texture created on the surface of cold glass by applying hot animal glue and allowing it to dry under controlled temperature and humidity conditions. As the glue dries and contracts, it chips the glass surface in a natural and attractive pattern, likened to frost on a window pane.

 

Gold Pink

Common name for coloured glasses in the pink/cranberry/fuchsia range that requires gold oxide as a colouring agent.

 

Hand Cast Sheet Glass

Sheet glass produced by the single roll method (see Glass Sheet-Forming Methods).

 

Iridescent

Surface treatment in which a layer of metallic oxide is bonded to the hot glass surface just after sheet-forming, resulting in a colourful, shimmering effect.

 

Jewel

A piece of glass that has been cut and faceted or press-moulded into a geometric shape like a jewel. Often incorporated into leaded glass artwork.

 

Leaded Glass

1. Sheet glass pieces joined with metal strips, usually made of lead, called "came." Solder is applied to the joints of the came to bond the work together.
2. Glass containing lead as a raw material (as in "leaded crystal").

 

Millefiori

Italian for "a thousand flowers" - Commonly refers to glass objects made from masses of murrini slices.

 

Mosaic

A picture or decorative design made by setting small coloured pieces of glass or ceramic material into a surface using cement or grout as a bonding agent.

 

Mottled Glass

See Ring Mottle.

 

Murrini

A thin slice of complex glass cane that can be used as a component in another glass object.

 

Noodle

A fettuccini-like glass shape used as a decorative element in the hot glass arts.

 

Nugget

(See also Studio Nuggets) A small, irregularly shaped "glob" of glass, flat on the bottom, rounded across the top. Nuggets are made by literally dropping a small amount of molten glass onto a flat surface. Frequently called "globs", they are often incorporated into leaded glass artwork.

 

Opal or Opalescent

Said of any glass into which a material has been introduced at the raw materials stage (usually fluorine or phosphorus) which causes a degree of crystallization to occur, and creates opacity in the glass. Reflected light is colourless, therefore white. The degree of opacity (and "whiteness") is variable depending upon composition and temperatures used in the manufacturing process. Commonly then, white glass is called "opal."

1. Solid Colour Opalescent Glass: Glass which is both coloured and crystallized, creating a single colour sheet, more opaque than a cathedral. Sometimes called "opaque" glass.
2. Mixed Opalescent Glass: White glass (opal) mixed with one or more other colours to create a variegated, multi-coloured sheet. Light transmission varies with composition. Also called "variegated opalescent", sometimes "streaky".

 

Painted Glass

Glass upon which special paints (containing frit) have been applied in illustration or decorative pattern and then heated in a kiln to a temperature high enough to fuse the pigments permanently to the glass surface. The modern version of the original medieval "stained glass”.

 

Pate de Verre

An art glass medium in which powdered glass frits are spread in a decorative design, then fired in a kiln.

 

Reamy

Descriptive of Full-Antique glass with a wavy irregular surface.

 

Refactory

High-temperature brick used to construct ovens for melting glass.

 

Ring Mottle Glass

An opalescent glass in which rates of crystal growth have been controlled to create ring-shaped areas of opacity. The effect is a visual surface mottling.

 

Ripple

A surface texture, often dramatic, consisting of linear or irregular ripples. Created naturally in some sheet-forming processes and imitated with an embossing roll in others.

 

Rods

Used to describe cylindrical, pencil-thick sticks of glass used primarily in flame-working and glass bead making. They are available in a wide colour range and many expansion coefficients.

 

Rondel

A mouth-blown piece of glass that has been spun into a circular shape, often irregular. Sometimes incorporated into leaded glass artworks. Machine-made facsimiles are common, called "pressed rondels".

 

Seedy Glass

Glass in which air bubbles are entrapped. Air or gas is injected into the molten glass prior to forming the sheet.

 

Slumped Glass

See Bent Glass.

 

Solder

A fusible alloy, usually tin and lead, used to join metallic parts, or the act of applying it. Used to bond metals in both the leaded and copper foil techniques of stained glass work.

 

Stained Glass

Commonly used to describe any coloured flat glass or any object made of such glass joined by metal strips. The term originally applied to coloured or clear flat glass cut to fit an artist's design, on which details were painted in pigment with a brush. The glass pieces were then heated in a kiln or oven to bond the pigment to the glass surface. This firing makes the painted detail as durable and permanent as the glass itself. Most religious windows from medieval times until this century were executed in this manner, and so the term came to be used first for any architectural application, and then for any design in coloured flat glass. It is now universally accepted as a convenient general term to define the art, the craft, and the industry.

 

Streaky Glass

Two or more cathedral glasses mixed together to create a multi-coloured glass sheet. Some use this term also to describe Mixed Opalescent glass as defined above.

 

Stringer

A spaghetti-like glass shape used as a decorative element in the hot glass arts.

 

Studio Nuggets™

Uniform clear glass pellets used as a raw material in glass blowing, glass casting, and fusing. Part of the System 96® family of tested compatible products.

 

System 96®

A broad family of Tested Compatible glass materials for the hot glass arts. Suitable for blowing, fusing, casting, flame-work, and any combination of these media, System 96 is a partnership of independent companies who test their products to an identical standard to assure their compatibility.

 

Terrazzo

A combination of marble, granite, onyx, or glass chips in a binder of portland cement or other resinous material. After curing, the surface is ground to expose the decorative chips.

 

Tested Compatible

Descriptive of glasses which have been tested and marked prior to sale to verify compatibility with each other when combined in a hot glass process such as blowing, fusing, or casting.

 

Textured Glasses

1. Rolled textures: In rolled glasses (see definitions below); one of the forming rolls is embossed with a texture that is imprinted on the glass as the sheet is formed. This produces glass smooth on one side and textured on the other. Common examples are "hammered", "granite", and "muffle”.
2. Natural textures: Any textural effect created without mechanical influence or embossed rolls. Includes Baroque and Waterglass®.
3. Cold glass textures: This category includes glue chipping, etching, sand blasting, and any other surface treatment performed on the cold glass sheet at room temperature.

 

Waterglass®

A natural surface texture created by stretching the hot glass sheet while it is still in a malleable state. The result is gentle, rolling waves that resemble the surface of a lake or stream. Waterglass® is exclusive to Spectrum Glass.

 

Wispy

Mixed opalescent glass with only thin wisps of white, resembling lazy cloud trails. A Spectrum Glass innovation.

 

 

Manufacturing Terms - Process related

Annealing

Cooling the formed glass product at a controlled rate of temperature change, for the purpose of relieving thermal stress. The appropriate cooling curve varies with glass type and formed shape, especially thickness. Directly related to glass cutability.

 

Batch

The mixture of granular raw materials that is prepared and put into the melting furnace to create a given glass. The primary raw materials for clear glass are silica sand, soda ash and limestone. Cullet is also often used.

 

Continuous Furnace

A glass melting furnace which is continuously full of molten glass. The introduction of batch (raw materials) into the furnace displaces existing molten glass and forces it out of the furnace and through the forehearth to the forming process. The process continues for the life of the furnace. (See Process Diagram).

 

Cullet

Crushed glass scraps, generally created as a by-product in glass making, can also be crushed glass specifically produced per a customer's request. Some glass makers use cullet from other sources or from glass recyclers as a major raw material in their own batches.

 

Day Tank

A glass melting furnace that is designed to operate on a 24-hour cycle. The batch is added to an empty furnace at a rate that allows it to melt properly, until the furnace chamber is full. Then, after suitable "cookout" has occurred, the molten glass is used to make product. When the furnace is empty, the cycle is repeated.

 

Forehearth

A shallow chamber through which molten glass passes on its way from a continuous melting furnace to the forming process. The purpose of this chamber is to allow the temperature of the glass to drop from melting temperatures (about 2,700°F) to forming temperatures (about 2,200°F for 1/8" thick sheet glass). (See Process Diagram)

 

Lehr

An enclosed chamber through which formed glass products are carried for the purpose of annealing.

 

Pot Furnace

A melting chamber in which one or more ceramic pots are placed. Batch is fed into the individual pots through ports in the chamber walls, and when melted, glass is ladled from the pots via the same ports. Each pot is fairly small. The pot furnace allows the melting of a number of different glass colours (as many as there are pots) at the same time, within a single melting chamber.

 

 

Glass Sheet Forming Methods

Sheet glass types are often by delineated by how the sheet is formed. Thus, people speak of "mouth-blown", "double-rolled", "drawn glass", "float glass", "hand cast glass", and so on.

 

Blown Cylinder Method

See Full Antique

 

Single Roll Method

Molten glass is poured onto a metal table and a single metal roll is used to flatten it into a sheet. Sometimes called "hand cast" sheet glass.

 

Double Roll Method

Molten glass is passed between a pair of rotating metal rolls to form the sheet.

 

Vertical Draw Method

Molten glass is pulled up vertically through a slit in a large one-piece refractory block that is floating on the glass surface. The annealing lehr is mounted vertically over the draw chamber. Drawn glass is generally more pristine than rolled glass because its surface has remained untouched during forming.

 

Float Process

Molten glass is pulled from the forehearth atop a bath of molten tin. The process produces a perfectly smooth sheet of uniform thickness in high volume. The float process is used to produce virtually all common window glass today, thus the term "float glass." Not used for art glass production.

 

Information courtesy of http://www.spectrumglass.com/stained-glass/dictionary.asp